The control of the wood drying equipmentxingnan
In the process of using wood drying equipment drying wood that can produce all kinds of defects, most is to be able to prevent or mitigate these defects. Below is my company to analyze the wood in drying process of common drying defects and reasons:
1. The temperature display: set temperature inside the oven for automatic heating control, generally can be set 40-80 degrees, low heat, high temperature stops, can keep constant temperature oven.
2. The humidity, temperature humidity inside the oven for automatic tide control, intelligent control of fuzzy moisture removal, the humidity control in the oven error of 3%, can automatically control the humidity in the oven. Ensure that the moisture timely exclusion.
3. The tray will be installed chrysanthemums, and pressed into the oven, can not overlap, avoid unnecessary air leakage tray to place is not good. Close the door is open the stove fan, light the stove, start to send in the hot air, gradually to 50 °, the temperature in the oven heating heating 30 minutes to 1.5 hours, see inside the suitcase is moisture, the tide began to row, about moisture removal for 2 minutes or so, moisture removal after the temperature will fell, continuing heating.