6 kinds of traditional methods to identify wood dryingxingnan
With the continuous development of science, people get rid of the traditional way to detect the degree of wood drying, replaced by the advanced monitoring equipment and instruments, not only measurement accuracy, and more convenient to use and reliable.
But most of the time there is no equipment, still need some simple method to judge the dry degree of the wood.The following simple introduction of several traditional methods for everyone, can be used in the life is simple.The following these is to compare the traditional rough detection way, in the usual life don’t need that precise time easy to use.
1, wood.After natural air-dry wood, natural to lighter than water cut wood.To the building materials market to pick, you can use it.
2, wood handle.Touch is relatively dry, nor too cold.
3, knuckles knocking, suggests that more dry, crisp wet voice is relatively heavy.
4, listen to the voice of the carpenter’s plane, TuiBao voice clear, smooth plane out of wood, wood shavings of fever, was dry, on the other hand is wet.
5, knead a sawdust, whether you feel dry.
6, good wood under kleenex, 2 days to see if the damp, also can judge the degree of dry wood.
If you need accurate results, further with the aid of the instrument.